THERMOID AERODUCT® DUCTING
Aeroduct wire-supported ducting, in its various forms and constructions, provides the most versatile type of ducting in the industry. It’s suitable for permanent or temporary installations to meet many different applications. Aeroduct aircraft ducting is manufactured with fiberglass fabric, impregnated with neoprene or silicone rubber compounds that are developed for flame resistance and high-temperature applications.

Aeroduct® SCAT Single Ply Silicone Coated Ducting – Red

• Recommended for use in conducting extremely cold or hot air ranging, from -65°F to +550°F
• Lightweight and extremely flexible
• Constructed in short sections that can be joined to form continuous length to minimizes waste

 Aeroduct® SCEET Double Ply Silicone Coated Ducting – Red

• Highly flexible
• Easily installed around obstructions and sharp bends
• Less air friction loss than similar non-lined ducting
• Ideal for use in extremely cold or hot air, ranging from -80°F to +550°F
• Good for conveying fumes

Aeroduct® CAT Single Ply Neoprene Coated Ducting – Black

• Extremely lightweight, highly flexible, low-pressure ducting
• Suitable for conveying fumes and air
• Short lengths can be easily joined together to form a continuous length

Aeroduct® CEET Double Ply Neoprene Coated Ducting – Black

• Features a fabric liner on the inside diameter allows air to flow smoothly, even in tight bends
• Offers less air friction loss than unlined ducting
• Recommended for use in hot or cold air applications and for conveying fumes

Aeroduct® LORA and SLOOT Sleeving

• Produced with unlimited variety of materials and rubber compounds
• Specially fabricated flame-resistant fiberglass infused with neoprene or silicone rubber are most common sleeving
• Nylon, cotton and other basic fabrics available
• Excellent non-metallic conduit to protect cables and electric wiring
• Can be hand crushed during installation and will shape to square or rectangular rigid tube ends
• Installation features:
  • Compensation for misalignment during install
  • Dampens and absorbs vibration
  • Provides for deflection
  • Absorbs longitudinal expansion contraction prevalent in metal tubinG

AERODUCT® JET STARTER HOSE AND SCUFFER JACKETS
Aeroduct Jet Starter Hose features a specially compounded silicone rubber tube that withstands temperatures up to 500°F and as low as -80°F. Light enough to be handled easily by one person, the hose constructions feature a synthetic yarn reinforcement that assures high burst strength (400 PSI and higher), dimensional stability, and maximum flexibility. Plus, it’s resistant to heat, solvents, mildew, and fuels. In addition, replaceable leno weave or open-braided scuffer jackets extend service life and provide an extra measure of abrasion-resistance and durability by shielding the jet starter duct from the damage that often results from being dragged and scuffed over concrete ramps and runways.

Aeroduct® Jet Starter Hose

• Features a specially compounded seamless, silicone rubber tube
• Withstands temperatures up to 500°F and as low as -80°F
• Harnessing the power of the starter, it delivers that power at full pressure and temperature to the plane.
• Construction features synthetic yarn reinforcement that assures high burst strength (400 PSI and higher)
• Dimensional stability
• Maximum flexibility
• Resistant to heat, solvents, mildew and fuels
• 10H09 part number

 Aeroduct® Scuffer Jackets

• Replaceable scuffer jackets protect the hose from damage caused by dragging and scuffing over concrete ramps and runways.
• Available in 5 different assembly configurations
• 51180
• 51180 LW Lightweight jacket low profile scuffer strip minimizes hang-up on equipment or ramps
• 51180 HV high visibility options
• 51180 LW HV
• 1170 String jacket
• Replaceable Leno Weave or open-braided scuffer jackets
• 50859
• 50859 LW
• 50859 HV
• 50859 LW HV
• 1106 String jacket

 Aeroduct® Pre-Conditioned Air (PCA) System Ducting

• Perfect for moving large volumes of hot or cold conditioned air
• features a rugged, two-ply, yellow vinyl-coated fabric with moisture-proof insulation between plies
• flat air ducts available
• 8”, 10”, 12” and 14” inside diameters
• up to 25 ft. lengths
• temperature range of -40°F to +275°F

Aeroduct® MIL-DTL 6000 Oil and Coolant Hose

• Designed to handle the effects of oil, alcohol, coolant and water both inside and out
• Tube is oil resistant with a black cover reinforced with strong mildew-resistant yarns
• Can withstand extreme temperature conditions ranging from -40°F to +250°F
• Meets or exceeds US military specs
• Lightweight, flexible and easy to handle
• Perfect hose for hard to get to spots in tight engine compartments

For more information Thermoid parts, click here to visit the Thermoid website.